Big Bale Stacker Grab Arm Ram – Large – Phasing Right
Right hand grab arm phasing Cylinder. Please note this is different to the left hand. Standing behind the machine looking forward, this is the arm on the right.
Big Bale Stacker Complete Tongue 1.5″
Big Bale Stacker Complete Pull Assembly. Suit 1.5″ Pin
Big Bale Stacker Bale Counter
Tracks and displays total bales stacked, Can be retro-fitted or ordered with either of the Big Bale Stackers
BBS Main Table Outer Rear Plastic Slides
BBS Main Table Outer Rear Plastic Slides. Individual- 2 Required Per Machine- Screws Included
BBS Main Table Centre Plastic Slides
Main Table Centre Plastic Slides. Individual – 12 Required Per Machine, Rivets included
Big Bale Stacker Sequence Valve Cartridge Only-SCCA-LAN
Sequence valve replacement cartridge only. SCCA-LAN (Check part number matches)
Big Bale Stacker Rim Only – Lemon Yellow
Big Bale Stacker Rim Only – Lemon Yellow (Not always stocked as a loose item)
Big Bale Stacker Grab Arm Pin/Bush & Sleeve Kit
2 Inch pin and bush replacement kit for pivot between Grab arm and first table (For 1 side only). Comes with: 1 x Pin, 1 x Inner Bush, 1 x 40mm Outer Bush, 1 x 50mm Outer bush, 2 x Teflon Sleeves, bolt and nut
Big Bale Stacker Sequence Valve Cartridge Only-RSDC-LAN
Sequence valve replacement cartridge only. RSDC-LAN (Check part number matches)
Big Bale Stacker Counter Balance Valve Cartridge
Big Bale Stacker Counter Balance Valve Single replacement Cartridge Only
2″ x 72mm Inner Bush
Big Bale Stacker Front table Pivot Inner Bush 2″ x 72mm Weld in
1.5″ x 135 Chrome Pin
Big Bale Stacker Pin Chrome 1.5 x 135mm
